MX-C507P [4] REPLACING PARTS AND SUPPLIES 4-11
5. Insert the new pick roller until it clicks into place.
6. Inser
t the tray.
7. Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to
an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
Replacing the pick roller in the multipurpose feeder
1. Turn off the printer, and then unplug the power cord from the electrical outlet.
2. Open the multipurpose feeder.
To Next Page
Loading...
