Permanent page count
This setting displays the total number of pages printed in mono and color. After all the print tests are completed,
this value resets to zero.
1
Enter the Diagnostics menu, and then touch
Printer Setup
.
2
View the permanent page count.
Enable edge-to-edge (printing)
This setting shifts all four margins to the physical edges of the page.
Note:
Contamination of the second transfer roller may result from printing up to the physical edges of the
page.
1
Enter the Diagnostics menu, and then navigate to:
Printer Setup
>
Enable edge
‑
to
‑
edge (printing)
2
Select a setting to adjust.
Note:
This feature does not work in PPDS emulation.
Enable edge-to-edge (copy)
This setting determines whether the printer accepts the ADF or flatbed edge erase value when performing an
ADF or flatbed copy.
1
Enter the Diagnostics menu, and then navigate to:
Printer Setup
>
Enable edge
‑
to
‑
edge (copy)
2
Select a setting to adjust.
Processor ID
This setting indicates the ID of the processor on the controller board.
1
Enter the Diagnostics menu, and then touch
Printer Setup
.
2
View the processor ID.
Serial number
This setting displays a read-only value of the serial number.
1
Enter the Diagnostics menu, and then touch
Printer Setup
.
2
View the serial number.
Model name
This setting displays the model name of the printer.
1
Enter the Diagnostics menu, and then touch
Printer Setup
.
2
View the model name.
To Next Page
Loading...
