Sharp MX-C507P - Page 481

5028
When performing the scheduled maintenance procedure, the following areas should be cleaned of media dust
and toner contamination:
•
•
•
•
•
•
•
•
Trays
PC cartridge area
Developer housings area
Transfer roll area
Duplex area
Standard bin
Bridge unit area (if equipped)
Finisher media bins (if equipped)
Maintenance
449
Part number and kit
Contents
Maintenance
interval
Action
MXC50FK—Fuser maintenance kit,
type 01, 220–240V
• 0SP41X0253/// - Fuser (220V)
• 0SP41X0956/// - Pick roller
• 0SP41X0374/// - Separator pad
150K
Reset the fuser
maintenance
counter after
replacing the
fuser
maintenance
kit. See
“Resetting the
maintenance
counter” on
page 450 .
MXC50TK—Transfer module
‑‑
150K
Reset the ITM
maintenance
counter after
replacing the
transfer
module. See
“Resetting the
maintenance
counter” on
page 450 .