Initial Setup
8
DocumentSolutionsAfterSalesService
DEVELOPER INSTALLATION
Sim 25-02 Auto Developer Adjustment
Note: Toner Cartridge Must Be Installed after
Auto Developer Adjustment
INITIAL SETTINGS
Sim 26-06 Machine Destination Set
Sim 26-01 Job Separator Installed
Yes/No.
Sim 21-01 Maintenance Cycle Setting
Set to 4=50k
PAPER FEED TRAY SETUP
[SYSTEM SETTINGS]
[Paper Tray Settings]
Settings specify the paper type, paper size, and functions for each paper
tray. When the [Tray Settings] key is touched, a list appears showing the
trays and the current settings.
IMAGE WRITING DISTORTION
Sim 64-012 Image Writing
Adjustment
Select 1 = Grid Pattern
PRINT IMAGE OFF CENTRE
Sim 50-10 Image Off Centre.
To Next Page
Loading...
