32
CHANGING THE PORT
7
Click the [Next] button in the screen of
step 5.
8
Click the [Finish] button.
9
Click the [Close] button in the screen of
step 2.
When using a port created with "Standard TCP/IP Port"
When using a port created using "Standard TCP/IP Port" in Windows 2000/XP/Server 2003/Vista/Server 2008, in the
screen that appears after you click the [Configure Port] button in the screen of step 3, make sure the [SNMP Status
Enabled] checkbox is not selected ( ). If the [SNMP Status Enabled] checkbox is selected ( ), it may not be possible
to print correctly.
!mxm503_us_ins.book 32 ページ ２００９年１月２２日 木曜日 午後２時２１分
To Next Page
Loading...
