17
SPECIFICATIONS
Printer specifications
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
*3 Supported operating systems are Windows 2000 / XP / Vista / Server 2008.
*4 When the XPS expansion kit is installed.
*5 To install the XPS expansion kit, an expansion memory board is required.
Type
Built-in
Continuous printing speed
Same as continuous copying speed (When printing same document continuously on 8-1/2" x 11"
(A4) plain paper in non-offset mode, excluding processing time.)
Printing resolution
600 x 600 dpi / 1200 x 1200 dpi
Printer driver type
PCL5e, PCL6, PostScript 3 compatible*
1
, XPS*
4
Supported protocols
TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
1
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
Fonts
PCL5e, PCL6 80 European fonts, 28 barcode fonts*
2
, 1 bitmap font
PostScript 3 compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)*
3
Memory
Standard system memory: 1 GB
Expansion memory: 1 GB*
5
Print area
Entire page excluding margin of 11/64" (4.2 mm) at each edge. The actual print area may vary
depending on the printer driver and the software application.
mxm503_us_saf.fm 17 ページ ２００９年５月１４日 木曜日 午後８時２５分
To Next Page
Loading...
