Sharp MX-M314N Technical Handy Guide

Firmware Upgrade Procedure
17
DocumentSolutionsAfterSalesService
1) Insert the media or USB memory which stores the firmware into the main
unit. (Be sure to use the USB I/F on the operation panel.)
2) Enter the SIM49-01.Press the key of the file to be updated. The screen
transfers to the update screen.
3) Current version number and the version number to be updated will be
shown for each firmware respectively.
4) Press [ALL] key. All the firmware programs are selected.
5) Press [EXECUTE] key. “ARE YOU SURE? [YES] [NO]”becomes clear. Press
[YES] key to start the update of selected firmware.
Progress is displayed on right side of "FIRMWAREUPDATE" title by 20 steps.
6) If the update is normal completion, following screen is dis-played. Press
[OK] key. (The machine is rebooted.) Go to SIM22-05 and confirm the
firmware has upgraded successfully.
Refer to the Service Manual Section 8 for more information.

Sharp MX-M314N Specifications

General

Print Technology	Laser
Print Speed	31 ppm
Standard Paper Capacity	1100 sheets
Duplex Printing	Yes
Max Scan Resolution	600 x 600 dpi
Copy Speed	31 cpm
Max Copy Resolution	600 x 600 dpi
Fax Capability	Optional
Network Connectivity	Ethernet
Functions	Print, Copy, Scan, Fax
Warm-up Time	20 seconds
Fax Transmission Speed	33.6 Kbps
Max Paper Size	A3
Scanner Type	Color
Display	7-inch color touchscreen
Original Size	A3
Operating System Compatibility	Windows, Mac, Linux