Sharp MX-M365N - Page 69

SHARP
TECHNICAL BULLETIN INDEX
SHARP Document Solution Centre
69
Note: Excludes Part Change/Correction Information.
Reference
Description
Model
COP2313
Release of Sharpdesk V3.5
All
COP2303
List of starting powders for Sharp MFPs
All
COP2302
Configuring scanning to OSX10.11
All
COP2288
Addition of Accessories (Mounting Screws)
MX-EB11
COP2273
Countermeasures against L4-02 paper feed motor trouble caused by
static charge.
All
COP2270
Countermeasures to prevent toner contamination on the paper.
All
COP2257
Rom version upgrade (including revision history)
MX-FN10
COP2255
Serial Number Identification
All
COP2251
Countermeasures to prevent noise from Right lower door unit, MF paper
feed unit and Right door unit.
All
COP2250
Countermeasures to prevent dog-earing or creasing of paper.
MX-M365N
COP2248
Countermeasures against paper misalignment and paper jam when
discharging paper to the centre tray.
All
COP2245
Measures to prevent malfunction of Home key.
All
COP2242
Improvement to prevent LSU from becoming loose.
All
COP2228
EEPROM handling
All
COP2223
Procedure when SSL certificate cannot be created
All
COP2222
Rom version upgrade (including revision history)
MX-FN17
COP2217
Countermeasures against power failure caused by defective L207
inductor on the DC power supply PWB
All
COP2215
Further improvement to prevent fusing drive gear from being worn.
MX-M365N
COP2212
Countermeasures against locked paddle roller, broken pawl on MX gear
R and burned MG roller within the DV unit.
All
COP2208
Measures to prevent F1-31 trouble or FSDMJ paper jam in the saddle
section.
MX-FN10
COP2201
Measures to prevent C4 trouble due to the excessive electrical noise
generated by the PS unit.
All
COP2200
Measures to prevent paper full detection error after removing paper
jammed in the delivery unit.
All
COP2196
Measures to prevent noise and/or banding problems caused by the
worn fusing drive gear.
All
COP2190
Printer installation under Mac OSX 10.10
All
COP2183
Measures to prevent the noise from the DSPF drive unit and drive
transport frame.
All
COP2178
Measures to prevent noise from the Delivery drive unit.
All
COP2175
Measures to prevent E7-11 trouble caused by faulty LED driver PWB.
All
COP2164
Change of PCU PWB
All
COP2160
Enhancement to improve the strength and performance of paper pass
unit.
MX-RB22
COP2132
Measures to prevent paper jam at/before the fuser entry
All
COP2131
Measures to prevent noise from the PS unit when the PS motor is
turning.
All
COP2121
Measures to prevent DV belt B from coming off the MG pulley.
All