Sharp MX-M365N - Page 245

Using the preset ratio key
Tap the [Copy Ratio] key, and then tap the [XY Zoom] key.
Tap the [X] key, and set the X (horizontal) ratio.
Tap the [Y] key, and set the Y (vertical) ratio in the same way as the [X] key.
After the settings are completed, tap .
Check that a paper size suitable for the ratio is selected.
Specifying the image dimensions
Tap the [Copy Ratio] key, and then tap the [XY Zoom] key.
Tap the [by Size] key.
To quickly set the ratio, first specify a value close to the desired one, then adjust
it with .
Tap each area of the X (horizontal) and Y (vertical) directions, and enter the sizes
using the numeric keys.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
245 of 1441 3/17/2016 7:14 AM