SPECIFYING THE ORIGINAL SIZE
Overview
When the original size is a non-standard size or is not detected correctly, manually
specify the original size.
Operation
Specifying an inch original size
Specifying an AB original size
Specifying a non-standard original size
Specifying an inch original size
Tap the [Original] key.
Tap the [Inch] tab.
Tap the appropriate original size key.
After the settings are completed, tap .
Set an original size before scanning the original.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
247 of 1441 3/17/2016 7:14 AM
To Next Page
