Tap the [On] key, and specify the original size as required.
After the settings are completed, tap and [Back] keys in sequence.
Place a card face down on the document glass, and tap the [Preview] key.
DOCUMENT GLASS
Tap the areas displaying width and height sizes respectively, and enter the
sizes using the numeric keys.
To quickly set the size, first specify a value close to the desired ratio
value by the numeric keys, then adjust it by tapping .
When you set the [Adjust to Paper Size] checkbox to , the original is enlarged or
reduced with the ratio appropriate to the original size.
To cancel the Card Shot setting:
Tap the [Off] key.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
271 of 1441 3/17/2016 7:14 AM
To Next Page
