Tap the [Start] key.
Considerable time is required to copy the dr
awings each month because the above setti
ngs must be selected.
In addition, mistakes are occasionally made
when selecting the settings, so some copies
must be redone.
The settings are stored in a program, so they can b
e selected by the touch of a key. This is simple and
takes no time.
In addition, the settings are all stored so there are
no chances for mistakes, and thus no need to redo
copies due to setting mistakes.
Operation
Specify the copy function to be stored.
Tap the [Program Registration] key on the action panel.
Tap a key not used yet for program registration.
A key with a program stored is displayed in color. Tap a key with no program
stored.
Up to 48 programs can be stored.
Program settings remains registered even when the main power has been turned
off.
A program can also be stored in a home page or bookmark as a shortcut;
therefore, it is helpful when retrieving it.
Using the base screen will display the [Program Registration] key.
If a program is not named, a serial number is automatically assigned instead of a program
name.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
388 of 1441 3/17/2016 7:14 AM
To Next Page
