the folder.
Macintosh
Select [Job Handling].
Click the [Retention] checkbox so that the checkmark appears.
Select how to save the print data in "Retention Settings". After you have entered
a password (a 5 to 8-digit number), click the button to lock the password.
This allows you to readily set the same password the next time you use it.
Select the folder to store the file in "Document Filing Settings".
When you have selected [Custom Folder], click the [Stored to] button to select
the folder.
When [Quick File] is selected, "Retention Settings" will be set to [Hold After
Print].
When [Quick File] is selected, the password entered in "Retention Settings" is
cleared.
If necessary, you can select the data format from CMYK and RGB for data to be
stored in the machine. Click the [Compatibility] button on the [Advanced] tab and
select the format from "Rip Format".
To store a file in a custom folder, you must first create the custom folder using
[System Settings] in "Setting mode" → [Document Filing Control]. If you have
set a password for the custom folder, enter the password in "Folder Password"
on the folder selection screen.
If you have configured to always use the force retention function in "Printing
Policy" on the [Options] tab, you cannot clear the [Retention] checkbox.
When your network is IPv6, files are stored in the main folder.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
492 of 1441 3/17/2016 7:14 AM
To Next Page
