Select the print conditions.
If you have selected multiple files in step 4, you can select only the number
of prints.
If you have selected a file that includes print conditions (i.e., PCL, PS, or
XPS files) in step 4, the settings will be applied.
Tap the [Start] key.
Printing begins after the selected file is transferred.
Entering the network folder path directly
Tap the [Direct Input of Folder Path] key in step 3 of "Printing a file in the
network folder you have configured in the machine's settings".
Enter the path to the folder, user name and password.
Access the network folder.
For the procedure for printing, see steps 4 to 6 of "Printing a file in the network
folder you have configured in the machine's settings".
A total of 100 keys of files and folders can be displayed.
Tap to move up one folder level.
To return to the network folder selection screen, tap .
Tap the [File or Folder Name] key to change the order of the files and folders
displayed on the screen. Each time the key is tapped, the order changes between
ascending and descending.
When the [Print on Glossy Paper] checkbox is selected, [Paper Select] is set to [Glossy
Paper] (bypass tray) and [Output Resolution] is set to [600 dpi (High Quality)].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
506 of 1441 3/17/2016 7:14 AM
To Next Page
