When the previously programmed 4-digit password is entered using the numeric keys,
printing begins.
When the [Cancel] key is tapped, the password entry screen closes. It will reappear when
you tap or change modes. The data in memory key will blink in the touch panel.
When the received data is transferred to other machine, data stored in memory is
also transferred. At that time, the same password entry screen will appear as for
printing. Forwarding will not take place unless the password is entered.
To display the received data list screen after entering the password:
In "Setting mode", select [System Settings] → [Operation Settings] → [Preview Setting] →
[Received Data Image Check Setting].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
598 of 1441 3/17/2016 7:14 AM
To Next Page
