If Hold Setting for Received Data Print is enabled, this function is not available.
To print received data at the specified time:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Operation
Settings] → [Default Settings] → [Time Specified Output of Received Data].
To disable the hold setting for received data print:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Operation
Settings] → [Default Settings] → [Hold Setting for Received Data Print].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
600 of 1441 3/17/2016 7:14 AM
To Next Page
