SAVING RECEIVED DATA
Overview
You can save received faxes in the document filing folder.
Operation
When data is received, is shown at the top of the screen.
The received data is listed.
This function is available when [System Settings] → [Operation Settings] → [Preview
Setting] → [Received Data Image Check Setting] is enabled
*
in "Setting mode".
* The factory default setting is disabled.
In the System Information, tap the [Event Information] tab and tap the [Check Fax
Reception Image] key
You can also display the received data list by tapping the job status display and tapping the
[Check Received Data] key on the action panel of Job Status screen.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
617 of 1441 3/17/2016 7:14 AM
To Next Page
