Sharp MX-M365N - Page 620

n selecting the settings. to the stored settings so there are no chances
for mistakes.
Operation
Place the original.
According to the function stored in the program, place the original in the
document feeder tray of the automatic document feeder, or on the document
glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Tap [Call Program] key on the action panel.
Tap the desired program key.
To configure a program:
Tap the [Store Program - Set Current Store] key that appears on the action panel when
you operate any mode screens.
The settings stored in a program will be retained even after the program is used
for transmission. The same settings can be used repeatedly for transmission.
The following contents cannot be stored in programs:
Tapping the [Speaker] key, Custom Size, Card Shot, page move and
unspecified erase during preview, Metadata Entry, Send Settings, and Own
Name Select.
Up to 48 programs can be stored.
Up to 500 destinations can be stored in one program.
A program in which sub addresses and passcodes are specified as an F-code
destination records all sub addresses and passcodes.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
620 of 1441 3/17/2016 7:14 AM