[Read-End] key has been tapped.
If the displayed number of original sheets is different from the actual number of sheets:
Tap the [Cancel] key and then tap the [OK] key in the message screen to clear all
scanned data. Scan settings and destination settings will not be cleared. Insert the original
sheets in the document feeder tray again and tap the [Start] key to re-scan.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
648 of 1441 3/17/2016 7:14 AM
To Next Page
