Operation
Place the original.
Place the original in the document feeder tray of the automatic document feeder,
or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
Specify the destination fax number.
ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS
RETRIEVING A DESTINATION NUMBER FROM AN ADDRESS BOOK
THE SELECTED DESTINATIONS
USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
RETRIEVING A DESTINATION NUMBER FROM A GLOBAL ADDRESS
BOOK
USING A TRANSMISSION LOG TO RESEND
SENDING BY CHAIN DIALING
operation will begin after that transmission is finished.
Only one timer polling operation can be stored at once. To receive data from
multiple destinations by polling, specify Timer for serial polling.
Settings selected for a timer transmission (exposure, resolution, other functions,
etc.) are automatically cleared after the transmission is finished. (However, when
the document filing function is used, the scanned original and settings are stored
in the built-in hard drive.)
If a job scheduled for timer transmission is given priority on the job status screen,
the timer will be canceled. The transmission will begin as soon as the job in
progress is completed.
PRIORITY PROCESSING OF A RESERVED JOB
The time can be specified up to a week in advance.
Other operations can be performed after a timer transmission is set up.
A timer transmission can be deleted in the job status screen.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
662 of 1441 3/17/2016 7:14 AM
To Next Page
