CHANGING FORMAT IN SCAN OR DATA
ENTRY MODE
*
Overview
Change the file format (file type and compression mode/compression ratio) for sending a
scanned image at the time of transmission. In addition, if the scanned originals are
divided into separate files, the number of pages per file can be changed.
File format combinations
[Color/Grayscale] tab [B/W] tab
PDF PDF
High Compression PDF
*
PDF
High Compression PDF (Ultra Fine)
*
PDF
PDF/A PDF/A
High Compression PDF/A
*
PDF/A
High Compression PDF/A (Ultra Fine)
*
PDF/A
Encrypted PDF Encrypted PDF
Encrypt/High Compression PDF
*
Encrypted PDF
Encrypt/High Compression (Ultra Fine) PDF
*
Encrypted PDF
TIFF TIFF
JPEG TIFF
XPS XPS
The scanner function expansion kit is required.
The file type of [B/W] mode and the file type of [Color/Grayscale] mode are linked. The
file type cannot be set separately for each. (When [JPEG] is selected for
[Color/Grayscale] mode, [TIFF] is automatically selected for [B/W] mode.)
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
779 of 1441 3/17/2016 7:14 AM