Operation
Tap the [File Format] key.
Tap the [Color/Grayscale] or [B/W] tab and select the format mode for
scanning.
The file format for sending a scanned image is specified when the destination is
stored in a one-touch key; however, you can change the format at the time of
transmission.
If [PDF/Encrypt] is specified for the file format, the password entry screen
appears when scanning. Enter a password with up to 32 characters.
Note the following when [PDF/High Compression] is specified in the [Color/Grayscale] file
format.
When broadcasting to an address with [PDF/High Compression] specified, all files
for the scanner will be sent as High Compression PDF files.
When broadcasting to an address with [PDF/High Compression] and [PDF/High
Compression/Ultra Fine] specified, all files for the scanner will be sent as High
Compression PDF (Ultra Fine) files.
If [High Compression/PDF] is specified, the resolution cannot be changed in the
scanner mode. The resolution is set to 300 x 300 dpi.
If [PDF/High Compression] is set when a resolution setting has been specified in
scanner (or other) mode, the resolution setting will be canceled and the High
Compression PDF resolution will be used for transmission.
When [PDF/High Compression] is selected, [Resolution] cannot be changed while
waiting for the next original or in [Change Setting] in the job build settings.
If [PDF/High Compression] is set when an original type setting has been specified
in scanner (or other) mode, [Photo] will change to [Text/Photo] and [Map] will
change to [Text/Printed Photo].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
780 of 1441 3/17/2016 7:14 AM