Sharp MX-M502N

35
MAINTENANCE
CLEANING THE BYPASS FEED
ROLLER
If paper misfeeds frequently occur when feeding
envelopes or heavy paper through the bypass tray, wipe
the surface of the feed roller with a clean soft cloth
moistened with water or a neutral detergent.
CLEANING THE ORIGINAL FEED
ROLLER
If lines or other dirt appear on the scanned original when
the automatic document feeder is used, wipe the surface
of the roller with a clean soft cloth moistened with water
or a neutral detergent.
1
Open the automatic document feeder and
remove the glass cleaner.
2
Clean the document scanning area on the
document glass with the glass cleaner.
3
Replace the glass cleaner.