39
MAINTENANCE
REPLACING THE TONER COLLECTION CONTAINER
The toner collection container collects excess toner that is produced during printing. When the toner collection container
becomes full, "Replace used toner container." will appear. Follow the procedure below to replace the toner collection
container.
1
Open the front cover.
2
Remove the toner collection container.
(1) Tilt the toner collection container forward.
Grasp the corners of the toner collection container with
both hands as shown and tilt it forward until it stops.
(2) Slowly lift the toner collection container up.
3
Place the box on a flat surface.
Place a sheet of newspaper on the surface before placing the
box.
Do not point the holes down as used toner will spill out.
4
Remove the provided cap from the side
of the toner collection container.
Grasp the end of the cap and pull forward.
To Next Page
Loading...
Need help?
General
