Sharp MX-M623N - Page 15

SHARP
MAINTENANCE
15
300k
Maintenance (Cont’d):
Transfer Section:
Replace MX-753KB Maintenance Kit:-
 Transfer Belt
 Transfer Roller
 Transfer Drive Gear
 Transfer CL Roller
Paper Feed & Transport:
Check/Clean/Replace PF Rollers (AR-620RT)
Check/Clean Torque Limiter for PF Separation Roller.
Sim 24-01 Clear Jam Counter (if required).
Sim 24-02 Clear Individual Tray Counter when P/F Rollers are
replaced.
DSPF:
Check/Clean/Replace PF Rollers (MX-753DF)
Check/Clean Torque Limiter for DSPF Separation Roller.
Check/Clean all DSPF Transport Rollers.
Clean all DSPF sensors.
General:
Clean all optics, CCD, and white reference plate.
Adjustments:
Sim 44-02 Image Density & Registration Sensor Adjustment.
Sim 44-06 Process Control execution.
Image Quality:
Sim 46-74 Automatic Half Tone Adjustment (Copy & Printer).