Network (Web Page)
1. Open a web browser and enter the following URL :-
http://ipaddress/service_login.html or
http://ipaddress/service_account.html
Example: http://192.168.0.175/service_login.html
Note: If User Authentication (username & password) is enabled, open the device
webpage and “login” using the service username and password (as below):-
2. Enter the “Service” Username and Password to access the Service Webpage and click Login:-
Default Username: service
Password: service
3. When the service webpage opens, click Update of Firmware.
4. Click Browse to navigate to the location of the updated firmware file and select
Open.
To Next Page
Loading...
