Sharp MX-M623N

JOB LOG ERROR CODES
SHARP
40
PRINTER
Error
Job Log / Status Monitor Message
Comment
022C
The requested job could not be
completed correctly due to the following
reason:
(Tandem Printing: Incorrect setting parameter)
022D
(Tandem Printing: Not setting)
022E
The requested job is printed, but could
not be stored because:-
(Document filing: Selected folder does not exist)
022F
The requested job is printed, but could
not be stored because:-
(Document filing: Incorrect folder password)
0230
(Document filing: No. of jobs exceeded the limit)
0231
(Document filing: Selected folder does not
exist). The job is stored to the default folder.
0232
The requested job is printed, but could
not be stored in the selected folder
because:-
(Document filing: Selected folder does not
exist)The job is stored to the default folder.
0233
(Inserter: Incorrect output tray selection)
0236
The requested job could not be
completed correctly due to the following
reason:
(Covers/Inserts: Prohibited)
0237
The requested job is printed, but could
not be stored in the selected folder
because:-
(Document filing: Incorrect folder password)
The job is stored to the default folder.
0238
The requested job could not be stored in
the selected folder because:-
(Document filing: Incorrect folder password)
The job is stored to the default folder.
0239
The requested job is printed, but could
not be stored due to the following
reason:
(Disabling of Quick File Mode)
023A
(Disabling of Sharing Mode)
023B
(Disabling of Confidential Mode)
023C
(Disabling of Storing to the selected folder)
023D
(Disabling of Document Filing)
023E
(Disabling of Print Jobs Other Than Hold Job)
023F
The requested job is stored in "Quick
File" folder, but could not be printed
because:-
(Disabling of Print Jobs Other Than Hold Job)
0240
The requested job is printed, but could
not be stored due to the following
reason:
(Retention printing: Prohibited)
0241
The requested job could not be
completed correctly, due to the following
reason:
(Offset: Disabled)
0242
The requested job is stored, but could
not be printed due to the following
reason:
(Offset: Disabled)
0243
(Disabling of printing)
0244
The requested job is printed, but the
following phenomenon occurred:
(Invalid user)
0245
The requested job is stored, but the
following phenomenon occurred:
(Invalid user)
0246
The requested job is printed, but the
following phenomenon occurred:
(Number of allowed pages exceeds the limit)
0247
(Print quality: Setting parameter modified)
0248
The requested job is stored, but the
following phenomenon occurred:
(Print quality: Setting parameter modified)
024B
The requested job could not be
completed correctly due to the following
reason:
(Only 2-sided print approved)
024C
(Only 1-sided print approved)
024E
Document control function has been
enabled automatically on the specified
job.
(Print setting of Document control function:
Always print)