173
SYSTEM SETTINGS LIST
A list of the system setting items explained in this manual and the factory default settings is shown below.
■ Address Control
■ Fax Data Receive/Forward
*1 When a saddle stitch finisher or finisher is installed.
*2 When a folding unit is installed.
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Item Factory default setting Page
■ ADDRESS CONTROL
174
● ADDRESS BOOK - 174
● CUSTOM INDEX - 177
● PROGRAM - 177
● F-CODE MEMORY BOX - 179
Item Factory default setting Page
■ FAX DATA RECEIVE/FORWARD
181
● I-FAX SETTINGS 181
X Reception Start -
X Manual Reception Key in Initial Screen Enabled
X Forward Received Data -
● FAX SETTINGS 182
X Receive Setting Auto Reception
X Multiple Set Print Disabled
X Staple*
1
Disabled
X Fold*
2
Disabled
X Forward Received Data -
To Next Page
