99
System settings (administrator)
The system settings (administrator)* are system settings that can only be configured by the administrator of the
machine. To configure these settings, the administrator password must be entered.
However, when user authentication is enabled, users who log in with certain user rights may be able to configure
these settings without entering the administrator password. Check with your administrator.
* Although the manuals for the machine indicate system settings that require administrator rights as "system
settings (administrator)", this is only for convenience in explaining the settings. The word "administrator" does
not appear in the touch panel or elsewhere on the machine.
For the items of the system settings (administrator), see the Administrator's Guide. (You can also refer to the
"SYSTEM SETTINGS MENU" on the next page.)
Manuals containing explanations of the system
settings
Explanations of the system settings can be found in several different manuals, depending on the function and
required rights. Refer to the following table to determine where an explanation can be found.
Operation manual System setting item
User's Guide
• Total Count
• Default Settings
• List Print (User)
• Paper Tray Settings
• USB-Device Check
Printer Guide
• Printer Condition Settings
Image Send Guide
• Address Control
• Fax Data Receive/Forward
Document Filing Guide
• Document Filing Control
Administrator's Guide
• System settings (administrator)
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
