Sharp MZ-5500 Tehnical Manual

\1
ii) Software
(1) Since the user DMA is not at all supported by the OS, the user program
, must be deve10ped by the assembler.
(2) Assign on1y the channe1 3 for the DMAC. Never reset and mask the chaI'nel
2 wi th the master clear command, for examp le .
(3) Bef~re the DMA, send BOR to the 1/0 address AEH to open the user DMA.
(4) 64KB is the maximum that can be subjected to DMA at one time.
(5) Assign the single transfer mode for the DMA operation.
tl
.\
4 ~ 7

Sharp MZ-5500 Specifications

General

Brand	Sharp
Model	MZ-5500
Category	Desktop
Language	English