Sharp MZ-700 - Page 127

4.2.3 Memory map after the BASIC interpreter has been loaded
(MZ-700
mode).
MONIT OR
C
ROM )
$0000 1
$1000 ~- ----------------~
$0000 .------- ------ ---.
V-RAM
V -RAM
$EOOO ~~~ ~~~~ ~~
KEY and TIMER POP.T
$F000 r---------------~
Disable
$0000 ,- ---- -----------.
SYSTEM
$1000
BASIC
$0000 ··············································
En ab le
• The memory map is as shown above after the BASIC interpreter has been loaded.
• Bank switching is performed to access V- RAM or the KEY and TIMER PORT area.
---- -------- ---------- ---- -------------- ---------------------- ---- ------125