EasyManua.ls Logo

Sharp Notevision XG-C40XU - Unplug the Power Cord

Sharp Notevision XG-C40XU
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E-48
Maintenance &
Troubleshooting
Air Filter Maintenance
3
Clean the air filter.
4
Replace the filter cover.
Insert the tab on the end of the filter cover into the
filter cover opening and press the filter cover into
position.
Clean the dust off the air filter and cover with a
vacuum cleaner extension hose.
Tab
1 3
Unplug the power
cord.
2
Remove the bottom
filter cover.
Grasp the air filter between your
fingers and lift it out of the filter
cover.
Turn over the projector. Press the
tab and lift open the filter cover
in the direction of the arrow.
Remove the air filter.
Insert the tab on the end of the filter cover into the
filter cover opening and press the filter cover into
position.
Tab
Replacing the bottom air filter
Be sure the filter cover is securely installed. The power will not turn on unless it is correctly installed.
Cleaning the bottom air filters (not removable)
If dust or dirt has collected inside the air filter housing, clean the area with a vacuum cleaner extension hose.
4
Replace the new air filter.
5
Replace the filter cover.
Place the new air filter underneath the tabs on
the filter frame.
Tab

Table of Contents

Related product manuals