To Next PageTo Next PageWhat to do if the CLEAN-SIGN Light on my Sharp Plasmacluster KC-6400E stays green even when the air is impure?
If the CLEAN-SIGN light remains green despite impure air, it might be because the air was already impure when the unit was plugged in. To resolve this, unplug the Sharp Air Cleaner from the electrical outlet, wait one minute, and then plug it back in.
How to fix odours and smoke not being removed by my Sharp Plasmacluster KC-6400E?
If your Sharp Air Cleaner isn't removing odours and smoke, the filters may be heavily soiled. Clean or replace the filters.
General| Brand | Sharp |
|---|---|
| Model | Plasmacluster KC-6400E |
| Category | Air Cleaner |
| Language | English |
Highlights the synergistic effect of humidification and Plasmacluster ions for enhanced purification.
Details the enhanced ion shower operation with humidification for effective air purification.
Explains the two-stage filtration process including HEPA and Active Carbon filters.
Illustrates the parts and components of the KC-6400E model.
Illustrates the parts and components of the KC-6500E model.
Lists the items included with the air purifier, such as the operation manual.
Details the function and meaning of various indicator lights on the unit.
Identifies and describes the function of the control buttons on the main unit.
Explains the operation of the Humidify Mode and related indicators.
Describes the indicators for mist filter cleaning and water tank levels.
Details the functions of the Mist Filter Reset and Power ON/OFF buttons.
Step-by-step guide for installing the HEPA and Washable Active Carbon filters.
Instructions for filling the water tank for humidification operation.
Explains how to turn the air purifier on and off using the power button.
Details how to activate and operate the Ion Shower mode for rapid purification.
Describes how to use the Mode Selection button to switch between operating modes.
Explains settings for Normal Use, Quiet Use, and Dry Air conditions.
Instructions for running the unit in Clean Air mode, turning off humidification.
Explains how to turn the Plasmacluster Ion mode on and off.
How to turn the Plasmacluster and CLEAN-SIGN indicator lights on or off.
Guidance on how to clean the exterior of the main air purifier unit.
Instructions for cleaning the water tank and preventing mold growth.
Detailed instructions for washing and drying the washable active carbon filter.
Guidance on when to replace HEPA and Washable Active Carbon filters.
Information on when to replace the Mist Filter and its types.
Information on proper disposal for private households in the EU and outside.
Information on proper disposal for business users in the EU and outside.
