What to do if the Filter Indicator Light remains activated on my Sharp Air Cleaner?
If the Filter Indicator Light on your Sharp Air Cleaner stays on even after you've cleaned or replaced the filter, plug the power cord into an outlet and then press the Filter Reset Button. You can find this button on the main unit or on the remote control.
What to do if my Sharp Air Cleaner does not operate when cigarette smoke is in the air?
If your Sharp Air Cleaner isn't detecting cigarette smoke, make sure the unit is in a location where the sensors can easily detect smoke. Also, check the odor or dust sensor openings to ensure they aren't blocked or clogged. Clean the openings if necessary.
How to fix a Sharp Air Cleaner remote control that is not working?
If your Sharp Air Cleaner isn't responding to the remote, first check if the batteries are depleted or inserted incorrectly. Also, flickering fluorescent lighting in the room might be interfering with the remote's signal.
Why does my Sharp Plasmacluster FP-N60CX Air Cleaner have an odor?
If the discharged air from your Sharp Air Cleaner has an aroma or odor, the filters may be heavily soiled. Clean the Washable Active Carbon Filter or replace the filters. Ensure the Washable Active Carbon Filter is completely dry after cleaning. Also, Plasmacluster Air Purifiers emit small traces of ozone which may produce an odor. These ozone emissions are below safety levels.
Why is the CLEAN-SIGN Light on my Sharp Air Cleaner red when the air is clean?
If the CLEAN-SIGN Light on your Sharp Air Cleaner is orange or red even when the air seems clean, the sensor filter might be dirty or clogged. The sensor sensitivity can become unstable when the sensor openings are dirty or clogged, so remove dust from the sensor filter.
Why is the CLEAN-SIGN Light on my Sharp Plasmacluster FP-N60CX green when the air is impure?
If the CLEAN-SIGN Light on your Sharp Air Cleaner is green even when the air is impure, check if the opening of the odor sensor is blocked or if the sensor filter is clogged. Also, the air might have been impure when the unit was initially plugged in.
How to turn on the Plasmacluster Indicator Light on my Sharp Plasmacluster FP-N60CX?
If the Plasmacluster Indicator Light or the CLEAN-SIGN Light on your Sharp Air Cleaner won't turn on, the Display OFF Mode might be selected on the Remote Control. Press the Display ON/OFF Button on the Remote Control to activate the indicator light.
Why does the Plasmacluster Indicator Light on my Sharp Plasmacluster FP-N60CX Air Cleaner stay green?
If your Sharp Air Cleaner's Plasmacluster Indicator Light stays green (or blue) and doesn't change, it might be because the unit is in Clean Mode or Ion Control Mode. In these modes, the light color will not change.
What to do if my Sharp Plasmacluster FP-N60CX is not removing odors and smoke?
If your Sharp Air Cleaner isn't removing odors and smoke effectively, the filters might be heavily soiled. Try cleaning them to see if that improves performance.
Why is my Sharp Air Cleaner making a clicking or ticking sound?
The clicking sound is normal when your Sharp Air Cleaner is in Ion Control Mode, and the ticking sound is normal when the unit is generating ions. If the sound bothers you, try moving the unit further away.
Reduce the risk of electrical shock, fire or injury to persons by following safety precautions.
Follow operational precautions to avoid damage, malfunction, or injury.
Step-by-step guide for removing and installing the air purifier filters.
How to operate the air purifier using the main unit controls.
Detailed steps for hand washing and drying the washable active carbon filter.
Information on when to replace filters and part numbers for replacements.
General| Brand | Sharp |
|---|---|
| Model | Plasmacluster FP-N60CX |
| Category | Air Cleaner |
| Language | English |
To Next Page