What to do if my Sharp Air Cleaner is not removing odors?
If your Sharp Air Cleaner isn't removing odors and smoke effectively, begin by cleaning the filters, especially if they appear heavily soiled. Also, ensure that the filters have been removed from their original plastic bags before use.
Why does my Sharp Plasmacluster FP-N25CX have an odor?
If your Sharp Air Cleaner emits an aroma or odor, several factors could be at play. First, examine the filters to see if they're heavily soiled. Secondly, inspect the Active Carbon Filter, and consider replacing the filters if necessary. Finally, be aware that Plasmacluster Air Purifiers may emit small traces of ozone, which can produce an odor.
How to fix a Sharp Plasmacluster FP-N25CX remote control that is not working?
If your Sharp Air Cleaner's remote control isn't working, start by checking if the batteries are depleted. If not, ensure the batteries are inserted correctly. Also, consider whether fluorescent lighting in the room is flickering due to its service life, as this can sometimes interfere with remote control operation.
Why is the CLEAN-SIGN light on my Sharp Plasmacluster FP-N25CX Air Cleaner red when the air is clean?
If the CLEAN-SIGN light on your Sharp Air Cleaner is orange or red even when the air is clean, the odor sensor's sensitivity might be unstable due to a dirty or clogged opening. To resolve this, clean the dust around the sensor opening using a vacuum cleaner.
Why Sharp Air Cleaner does not work when cigarette smoke is in the air?
If your Sharp Air Cleaner isn't operating when cigarette smoke is present, it could be due to a couple of reasons. The unit might be installed in a location where it's difficult for the sensor to detect the smoke. Alternatively, the odor sensor openings could be blocked or clogged; in this case, clean the openings.
Why is the CLEAN-SIGN light on my Sharp Plasmacluster FP-N25CX Air Cleaner green when the air is impure?
If your Sharp Air Cleaner's CLEAN-SIGN light is green even when the air is impure, it could be because the air was already impure when the unit was plugged in.
General| Model | FP-N25CX |
|---|---|
| Plasmacluster Technology | Yes |
| Fan Speed Levels | 3 |
| Timer Function | Yes |
| Air Quality Sensor | Yes |
| Auto Mode | Yes |
| Type | Air Purifier |
| Filter Type | HEPA Filter, Pre-Filter, Deodorizing Filter |
| Air Purification Method | HEPA Filtration, Plasmacluster Ion Technology |
Precautions for safe and proper operation of the air purifier unit.
Restrictions on where to use the remote control for optimal performance.
Recommendations for optimal placement and installation of the unit.
Guidance on the correct care and maintenance of air filters.
Step-by-step instructions for installing batteries in the remote control.
Detailed steps for correctly installing the air filters into the unit.
How to operate the main unit and its various modes.
Explanation of the Plasmacluster indicator light colors and meanings.
Understanding the air quality indicator light and its color changes.
Instructions on how to use the remote control to operate the air purifier.
How to clean and maintain the exterior of the air purifier unit.
Instructions for cleaning the odor sensor to ensure accurate readings.
Guidance on how to clean the air filters properly.
Information on when and how to replace the air filters.
To Next Page