Sharp Plasmacluster FP-N25CX User Manual

ENGLISH
E-9
Battery Information
• The batteries for this remote control are for initial use only . Change the batteries when
necessary.
• Incorrect usage of the batteries may cause battery fluid leakage and/or damage.
Take care of the following when handling:
•When replacing the batteries, replace both batteries with new ones of the same type.
(Use 2 AA manganese batteries.)
•When not using the unit or remote control for an extended period, remove the batteries.
• The batteries are for initial use only and may be depleted within 1 year.
INSERTING BATTERIES IN THE REMOTE CONTROL
1
Remove the back cover
Press and slide the back cover to remove.
2
Insert batteries
Insert batteries with and as shown below.
3
Close the back cover
PREPARATION

Sharp Plasmacluster FP-N25CX Specifications

General

Brand	Sharp
Model	Plasmacluster FP-N25CX
Category	Air Cleaner
Language	English