How to reset the filter indicator light on my Sharp Air Cleaner after replacing the filter?
After replacing the filters on your Sharp Air Cleaner, connect the power cord to an outlet and press the Filter Reset Button on the remote control.
What to do if my Sharp Air Cleaner smells?
If your Sharp Air Cleaner emits an unusual smell, check if the filters are heavily soiled and replace them if needed. Also, note that Plasmacluster Air Purifiers release small traces of ozone, which might produce an odor. This ozone emission is minimal and below the safety levels, posing no harm to humans.
Why is my Sharp FU-P60S not removing odours and smoke?
If your Sharp Air Cleaner isn't removing odors and smoke effectively, the filters might be heavily soiled. Clean or replace the filters.
General| Brand | Sharp |
|---|---|
| Model | FU-P60S |
| Category | Air Cleaner |
| Language | English |
Explains the unit's control over negative and positive ions based on room conditions.
Details the different types of filters used for particle collection and odor absorption.
Lists crucial warnings to reduce the risk of electrical shock, fire, or injury.
Provides important cautions for operating the air purifier safely and correctly.
Outlines specific locations or conditions where the remote control may not function properly.
Instructions for filter care and maintenance.
Explains the operational principle including filter functions.
Identifies indicators and controls on the main unit's display panel.
Lists items included with the air purifier.
Shows the rear view and identifies parts.
Step-by-step instructions for installing batteries.
How to operate the remote effectively and its limitations.
Process of removing filters from packaging.
Instructions for correctly installing HEPA, Active Carbon, and Pre-filters.
Record installation date for future reference.
Explains main unit controls and modes like AUTO, 15 min HIGH, POLLEN.
Explains SENTINEL, Plasmacluster, Clean-Sign, and Filter indicator lights.
Details how to operate the air purifier using the remote control.
Provides instructions on how to clean the main body.
Explains how to clean and maintain the odor and dust sensors.
Details cleaning the Pre-Filter and general filter notes.
Explains filter washing, water removal, drying, and reinstallation.
Provides recommended replacement intervals for HEPA and Active Carbon filters.
Outlines steps for replacing filters and resetting the indicator.
Advises on proper disposal methods for used filters.
Lists common symptoms and their non-malfunction remedies.
Explains error indicators and their corresponding remedies.
Lists the technical specifications of the FU-P60S air purifier.
Details standby power consumption and energy saving advice.
To Next Page
