To Next PageTo Next PageWhat to do if the Cleanliness Monitor light is red even when the air is clean in my Sharp Air Cleaner?
If the Cleanliness Monitor light is red even when the air is clean when using your Sharp Air Cleaner, the dust(sensitive) sensor openings might be dirty or clogged, interfering with sensor operation. Gently clean the sensor filter or the back panel.
Why does air discharged from my Sharp Air Cleaner have an odor?
If the air discharged from your Sharp Air Cleaner has an odor, the filters may be extremely dirty. Try cleaning or replacing the filters.
How to eliminate persistent odor and smoke from my Sharp FP-J60E?
If odor and smoke persists when using your Sharp Air Cleaner, check the filters. If they appear extremely dirty, clean or replace them.
Why doesn't my Sharp Air Cleaner operate when cigarette smoke is in the air?
If your Sharp Air Cleaner's Main Unit does not operate when cigarette smoke is in the air, ensure the unit is installed where sensors can detect smoke. Also, check if the dust(sensitive) sensor openings are blocked; if so, clean the sensor filter or the back panel.
What to do if the Cleanliness Monitor is blue even when the air is not clean in my Sharp FP-J60E Air Cleaner?
If the Cleanliness Monitor is blue even when the air is not clean on your Sharp Air Cleaner, the air may have been dirty when the main unit was plugged in. Unplug the main unit, wait one minute, and then plug it in again.
Why does the Cleanliness Monitor change color frequently on my Sharp FP-J60E Air Cleaner?
The Cleanliness Monitor automatically changes color when the dust(sensitive) sensor and odor sensor detect impurities. If you are concerned about the change when using your Sharp Air Cleaner, you can change sensor sensitivity.
How to turn on the front display of my Sharp FP-J60E Air Cleaner?
If the Front Display of your Sharp Air Cleaner is turned off, the light control is likely set to 'Auto' or 'Turn off'. If you prefer the light to be on, change the Light control setting to 'Darker'.
General| Model | FP-J60E |
|---|---|
| Humidifying | No |
| Plasmacluster Ions | Yes |
| Dust Sensor | Yes |
| Odor Sensor | Yes |
| PM2.5 Sensor | Yes |
| Type | Air Purifier |
| Filter Type | HEPA, Pre-filter |
Combines High Density Plasmacluster, Triple Filtration, and Unique Airflow for effective purification.
Essential precautions for safe operation and handling of the appliance.
Identifies numbered components on the front of the main unit.
Identifies numbered components on the back and inside of the main unit.
Detailed explanation of each button and its function.
Information on filter life expectancy and replacement process.
Solutions for problems like persistent odors or incorrect air quality readings.
Troubleshooting steps for display errors and error codes.
