EN-7
PLASMACLUSTER ION
SPOT MODE
START/STOP
AUTO MODE
HAZE MODE
SELECTING MODE
SLEEP :
The main unit will operate quietly, and the fan
speed is automatically switched depending on
the amount of impurities in the air.
The Front Display and Cleanliness Monitor go
off automatically.
POLLEN :
The DUST SENSOR sensitivity is automatically
increased and quickly detects impurities such
as dust and pollen and clean the air powerfully.
START STOP
OPERATION
♪
♪
♪
The fan speed is automatically controlled
depending on the 3 detection. (Dust(sensitive) /
Odor / Light)
♪
NOTE
• Front Display, Cleanliness Monitor automatically
switch ON and OFF based on room brightness.
(When light control is set to "Auto". (page 9))
Use this mode when you want to remove adhering
odor, germs, and other substances from cloths,
sofas and curtains.
Adjust Front Louver manually.
NOTE
• Emits highdensity Plasmacluster Ions only in the
forward direction.
• Discharges stronger air for 8 hours. When the
operation nishes, the main unit will return to its
prior operation mode.
• The Plasmacluster Ion can not be turned “OFF”.
Operates at HIGH fan speed for 60 minutes and
then alternates between Low and High level for 20
minutes each.
NOTE
• The Plasmacluster Ion can not be turned “OFF”.
10 minutes:
Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
♪
♪
♪
♪
♪♪
POLLEN
SLEEP
LOW
MED
MAX
♪
♪
♪
♪
♪
♪
♪
♪
FP-J80E_EV_EP_L_J60E_L.indd 7 2018/09/07 15:43:56
To Next Page
Loading...
Need help?
General
