To Next PageTo Next PageHow to reset filter light on Sharp FP-J60Y?
If the FILTER Replacement Indicator Light is flashing on your Sharp Air Cleaner, after replacing the filters, connect the power cord to an outlet and then press the Filter Reset Button.
What to do if Sharp Air Cleaner is not cleaning?
If odor and smoke persist when using your Sharp Air Cleaner, check the filters. Clean or replace them if they appear to be extremely dirty.
Why Sharp FP-J60Y display is off?
If the front display of your Sharp Air Cleaner is turned off, it may be because the Light control is set to "Auto", and the light automatically turns off when the room is dark. Also, if the Light control is set to "Turn off", the light is always off. If you do not want the light to be off, set Light control to the "Darker" setting.
Why does Sharp Air Cleaner change color frequently?
The Cleanliness Monitor on your Sharp Air Cleaner automatically changes color when the dust(sensitive) sensor and odor sensor detect impurities. If you are concerned about the change, you can change sensor sensitivity.
What to do if Sharp FP-J60Y Air Cleaner doesn't detect smoke?
If your Sharp Air Cleaner doesn't operate when cigarette smoke is in the air, ensure the Main Unit is in a location where the sensors can detect cigarette smoke. Also, check if the dust(sensitive) sensor openings are blocked or clogged and clean the sensor filter or the back panel if needed.
Why Sharp FP-J60Y display is different?
Outdoor and indoor environments, as well as the home environment (the volume of traffic nearby, number of stories in home, etc.) may cause a reading on your Sharp Air Cleaner that differs from weather reports or other devices. There can also be a difference in the level within the same room.
Why does my Sharp FP-J60Y Air Cleaner make clicking noises?
The main unit of your Sharp Air Cleaner may make clicking or ticking sounds when it is generating ions.
What does quickly flashing error display mean for Sharp FP-J60Y?
When the Sharp Air Cleaner displays a quickly flashing error, it could mean that the communication between the SHARP server and the air purifier is not available, the concentration of Plasmacluster ion is descending, or the Plasmacluster Ion Generating Unit may not be inserted properly. You can also try unplugging the Main Unit, waiting one minute, and then plugging the Main Unit in again.
General| Brand | Sharp |
|---|---|
| Model | FP-J60Y |
| Category | Air Cleaner |
| Language | English |
Basic safety rules for electrical appliance usage.
Specific conditions and environments to avoid during operation.
Precautions for cleaning and maintaining the unit.
Details the buttons and controls on the main operation panel.
Instructions on how to power the air purifier on and off.
How to clean the exterior and back panel using a soft cloth.
Information on filter life, replacement models, and indicators.
Details on Plasmacluster unit life, replacement models, and indicators.
Solutions for common problems like odors, monitor errors, and unit sounds.
Explains various error messages and their corresponding troubleshooting steps.
