To Next PageTo Next PageWhy does the air discharged from my Sharp Air Cleaner have an odor?
If the air discharged from your Sharp Air Cleaner has an odor, check to see if the filters are extremely dirty. Clean or replace the filters to resolve this issue.
How to eliminate persistent odor and smoke from my Sharp Air Cleaner?
If odor and smoke persist when using your Sharp Air Cleaner, check the filters. If the filters appear extremely dirty, clean or replace them.
Why does the Cleanliness Monitor change color frequently on my Sharp FP-J60TA Air Cleaner?
The Cleanliness Monitor on your Sharp Air Cleaner automatically changes color when the dust(sensitive) sensor and odor sensor detect impurities. If you are concerned about the change, you can change sensor sensitivity.
What to do if my Sharp Air Cleaner does not operate when there is cigarette smoke?
If the Main Unit of your Sharp Air Cleaner does not operate when cigarette smoke is in the air, ensure that it is installed in a location where the sensors can detect cigarette smoke. Also, check if the dust(sensitive) sensor openings are blocked or clogged and, if they are, clean the sensor filter or the back panel.
Why is the Cleanliness Monitor light red on my Sharp FP-J60TA Air Cleaner when the air is clean?
If the Cleanliness Monitor light is red on your Sharp Air Cleaner even when the air is clean, it may be due to dirty or clogged dust(sensitive) sensor openings interfering with sensor operation. Gently clean the sensor filter or the back panel.
Why is the Front Display turned off on my Sharp FP-J60TA?
If the Front Display is turned off on your Sharp Air Cleaner, it may be because the light control is set to "Auto," which automatically turns off the light when the room is dark. If you do not want the light to be off, set the Light control to the "Darker" setting.
Why is the Cleanliness Monitor blue on my Sharp FP-J60TA even when the air is not clean?
If the Cleanliness Monitor is blue on your Sharp Air Cleaner even when the air is not clean, the air may have been dirty when the main unit was plugged in. Unplug the main unit, wait one minute, and then plug it in again.
Why does my Sharp FP-J60TA Air Cleaner make a clicking or ticking sound?
The main unit of your Sharp Air Cleaner may make clicking or ticking sounds when it is generating ions. This is normal.
Why doesn’t the Main Unit’s Display match weather report or another hygrometer or thermometer in the room of my Sharp FP-J60TA?
Outdoor and indoor environments, as well as the home environment, may cause a reading on your Sharp Air Cleaner that differs from weather reports or other hygrometers or thermometers in the room. Also, there may be a difference in the level within the same room.
General| Brand | Sharp |
|---|---|
| Model | FP-J60TA |
| Category | Air Cleaner |
| Language | English |
Observe basic safety precautions to reduce risk of shock, fire, or injury.
Troubleshooting tips if the main unit interferes with radio or TV reception.
Covers operating position, movement, filter handling, and exterior cleaning.
Guidelines for choosing locations to ensure optimal performance and longevity.
Identifies the components visible on the front of the main unit.
Identifies the components visible on the back of the main unit.
Explains the function of each button and indicator light on the operation panel.
Details the information displayed, including PM2.5, Wattage, and Humidity.
Step-by-step guide on how to correctly install the air purifier filters.
Basic instructions on how to turn the air purifier on and off.
Details on Auto, Clean Ion Shower, Plasmacluster Ion Spot, Sleep, and Pollen modes.
Configure the unit to automatically start or stop at a set time.
Learn how to activate child lock and switch display information.
Instructions for enabling or disabling the Plasmacluster Ion feature.
Adjust the brightness of the Front Display and Cleanliness Monitor.
Configure the unit to resume operation after power interruption.
Customize sensitivity for Light, Dust, and Odor sensors.
Instructions for wiping the exterior and cleaning the back panel (pre-filter).
Guidelines for cleaning and handling the HEPA and Deodorizing filters.
Procedure for cleaning the electrode section of the Plasmacluster Ion unit.
Information on filter life, replacement indicators, and disposal.
Details on the unit's lifespan, replacement indicator, and disposal.
Addresses problems like persistent odors, incorrect cleanliness readings, and sensor issues.
Covers clicking sounds, no operation, filter indicator flashing, and display errors.
Details on power supply, fan speed, noise level, rated power, and dimensions.
Specifies recommended room sizes for optimal operation and Plasmacluster effect.
