To Next PageTo Next Page
Need help?Do you have a question about the Sharp FP-S40 and is the answer not in the manual?
General| Type | Air Purifier |
|---|---|
| Model | FP-S40 |
| CADR (Clean Air Delivery Rate) | 240 m³/h |
| Power Consumption | 30 W |
| Pre-filter | Yes |
| Plasmacluster Technology | Yes |
| Fan Speed Levels | 3 |
| Filter Type | HEPA |
Product must only be used for its specified intended purpose as described in the manual.
Appliance not for persons with reduced capabilities; children must be supervised.
Do not repair or disassemble the product yourself; contact authorized service.
Never operate if power cord, AC adapter, or product is malfunctioning or damaged.
Follow specific instructions for power cord and AC adapter to prevent hazards.
Do not use near fires, flammable gases, hot areas, steam, or wet/damp locations.
Do not operate the product without the filters properly installed.
Do not operate in rooms with aerosol insecticides as fumes may remain.
Avoid products with fluororesin or silicone as they can affect Plasmacluster.
Explains buttons and indicators specific to the FP-S42 model, including Wi-Fi and air quality indicators.
Details buttons and indicators for the FP-S40 model, including timer functions.
Step-by-step guide on removing side panels and pre-filters, and installing new filters correctly.
Instructions for cleaning Odor, Temperature/Humidity, and Sensitive Dust sensors.
Procedure for washing and drying the sensor filter if it is very dirty.
Guidelines for cleaning the HEPA and Deodorizing Filters, avoiding washing or sunlight exposure.
Indicators for filter replacement and immediate replacement procedures.
Steps to reset the Filter Replacement Indicator after replacing the filters.
Troubleshooting steps for persistent odors or smoke, including filter checks.
Resolving issues with odor in the discharged air by checking and cleaning filters.
Action to take when the Filter Replacement Indicator flashes, including filter replacement and reset.
Steps to download, install, and link the air purifier with the Sharp Air App.
Detailed procedure for initializing the Wi-Fi function by pressing the Wi-Fi button.
