To Next PageTo Next Page
Need help?Do you have a question about the Sharp FP-S42 and is the answer not in the manual?
General| Model | FP-S42 |
|---|---|
| Type | Air Cleaner |
| Airflow (Max) | 240 m³/h |
| Airflow (Med) | 180 m³/h |
| Airflow (Low) | 60 m³/h |
| Plasmacluster Ion Technology | Yes |
| Power Consumption (Med) | 20 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Filter Type | HEPA |
| Filter Life | Up to 2 years |
Covers intended use, user limitations, child safety, and basic warnings for safe product operation.
Addresses operating damaged products, self-repair, power cord safety, and environmental restrictions.
Discusses ventilation near combustion appliances, avoiding water, and product stability and placement.
Key guidelines for safely installing and operating the air purifier, including filter installation.
Details components of the air purifier's main body, including outlets, sensors, and panels.
Identifies components located on the rear of the air purifier, such as cords and adapters.
Explains the operation panel layout and buttons specific to the FP-S42 model.
Details the operation panel layout and buttons for the FP-S40 model.
Lists and explains the function of each button and indicator on the operation panel.
Highlights additional indicators and buttons exclusive to the FP-S42 model.
Notes additional buttons and indicators exclusive to the FP-S40 model.
Instructions for removing side panels and pre-filters as the first step in installation.
Guide on taking out and installing the air filters from their packaging.
Steps for re-installing the pre-filters and side panels to complete the setup.
How to start and stop the air purifier's operation.
Explanation of different fan speed settings like AUTO, POLLEN, and SLEEP.
Details the function and operation of the HAZE mode.
Instructions for setting the timer function on the FP-S40 model.
How to activate and use the child-lock feature to prevent unintended operation.
Guide on how to turn the Plasmacluster Ion function on and off.
How to adjust or turn off the operation panel's indicator lights.
Instructions on how to adjust the sensitivity of the product's sensors.
Details the auto-restart function that resumes operation after power interruption.
Information about Bluetooth connectivity, exclusive to the FP-S42 model.
How to clean the main body of the air purifier using a dry, soft cloth.
Instructions for cleaning the side panels and pre-filters with a vacuum cleaner.
Method for cleaning stubborn dirt from filters using mild detergent and soaking.
How to gently clean the Odor Sensor with a cleaning tool.
How to gently clean the Temperature and Humidity Sensor.
How to gently clean the Sensitive Dust Sensor.
Procedure for cleaning the Sensor Filter, including washing if very dirty.
Guidelines for cleaning the Two in one HEPA and Deodorizing Filters.
Explains the meaning of the filter replacement indicator lights (slow/rapid flashing).
Steps to reset the filter replacement indicator after replacing filters.
Specifies the replacement filter model (FZ-S40S2E) and its maximum lifespan.
Solutions for persistent odor or smoke issues, including checking filters.
Troubleshooting steps for when the discharged air has an odor, checking filters and sensors.
Reasons why the product might not operate in cigarette smoke and how to fix it, checking sensor location.
Explanation for unusual smells from new products or filters, noting they are usually harmless.
Possible causes for clicking or ticking sounds during operation, possibly ion generation.
Explains why the Cleanliness Indicator might not change color promptly or remains unchanged.
Addresses frequent changes in the Cleanliness Indicator color due to sensor detection.
Reasons for the operation panel turning off, such as sleep mode or light control settings.
What to do when the filter replacement indicator flashes, including filter replacement and reset.
How to clear the error when the POLLEN indicator flashes and the product stops operating.
Troubleshooting for flashing LOW, AUTO, or MED indicators, usually resolved by power cycling.
Important safety warnings and precautions for using Wi-Fi functions remotely.
Advice and cautions for using the Wi-Fi function and associated app, including terms of service.
Environmental conditions to avoid for optimal radio wave performance, e.g., near other wireless devices.
Security measures and advice for protecting personal information when using Wi-Fi.
Requirements for broadband internet, smart devices, and Wi-Fi routers for connectivity.
Information on software copyrights, license conditions, and registered trademarks.
Recommended router settings to disable for stable Wi-Fi connection, e.g., SSID stealth.
Steps to download and connect the Sharp Air App with the air purifier.
Explanation of buttons and indicators associated with the Wi-Fi function.
Procedure for switching the Wi-Fi function on and off.
Steps to resolve issues with Wi-Fi connection between purifier and router.
Solutions for failure to establish connection between purifier and smart device.
Troubleshooting remote operation issues from a smart device, checking indicator status.
Procedure for reconnecting the purifier to a new Wi-Fi router or updating smart device connection.
How to prepare the purifier for disposal or transfer to prevent data leakage.
Steps to secure the purifier and prevent unauthorized access when receiving it from a third party.
First step in initializing the Wi-Fi function by pressing the Wi-Fi button for over 8 seconds.
Second step for Wi-Fi initialization, involving a subsequent button press within 2 minutes.
Reference to page 8 for the method of turning Bluetooth ON/OFF.
Explains the meaning of a slowly flashing Wi-Fi indicator, indicating setup or update in progress.
Explains the meaning of a rapidly flashing Wi-Fi indicator, usually indicating a network error.
Explains why the Wi-Fi indicator might turn off (no router connection) and how to resolve it.
Specifies the model number of the air purifier.
Details the power supply requirements and AC adapter specifications.
Provides the rated input voltage/frequency and DC output voltage/current.
Lists fan speed settings (MAX, MED, LOW) and their corresponding performance data.
Specifies the power consumption in watts and noise levels in decibels for each fan speed.
Details the power consumption of the product in standby mode.
Recommended room sizes for optimal operation based on general standards.
Recommended room size for effective operation of the High Density Plasmacluster Ion function.
Lists the types of sensors used in the air purifier for environmental monitoring.
Identifies the type of filter used in the air purifier.
Specifies the length of the power cord in meters.
Provides the physical dimensions (Width x Depth x Height) of the product in millimeters.
States the weight of the product in kilograms.
Room size recommendations based on AHAM and GB standards for Clean Air Delivery Rate.
