Sharp FP-S42

EN-9
ENGLISH
How To Maintain
NOTE
Make sure to turn
off and unplug
the product before cleaning the
product and replacing the filters.
Do not use detergents other than
those that are mentioned in this
manual.
• Do not clean the product with volatile
fluids.
(Benzine, paint thinner, polishing powder
or grease, etc.)
Using these items may cause damage
or discoloration of the product or sensor
malfunction.
Maintenance cycle: Once a month
• However, please clean the Two in one
HEPA and Deodorizing Filters in the
following cases.
- Whenever dust accumulates.
- When odor emanates from the Air
Outlet.
NOTE
How to Clean Stubborn Dirt
1. Add a small amount of mild kitchen detergent to water and
soak for about 10 minutes.
2. Rinse off the detergent with clean water.
3. Allow the filter to dry completely in a well-ventilated area.
Pre-Filter
Main Body
Wipe with a dry, soft cloth.
Side Panels and Pre-Filters
Gently remove dust with a cleaning
tool such as a vacuum cleaner.
• Do not use force when cleaning the Pre-
Filter.
Side PanelPre-Filter
FP-S42_40.indb 9FP-S42_40.indb 9 2024/03/15 10:13:582024/03/15 10:13:58