To Next PageTo Next PageWhy is the Cleanliness Monitor light red on my Sharp FP-J80TA when the air is clean?
If the Cleanliness Monitor light is red on your Sharp Air Cleaner even when the air is clean, it may be due to dirty or clogged dust(sensitive) sensor openings interfering with sensor operation. Gently clean the sensor filter or the back panel.
How to eliminate persistent odor and smoke from my Sharp Air Cleaner?
If odor and smoke persist when using your Sharp Air Cleaner, check the filters. If the filters appear extremely dirty, clean or replace them.
What to do when changing the router for Sharp FP-J80TA?
You need to reconnect the air purifier to the router. To do this, first, hold down the "WLAN" button for 3 seconds to stop the wireless LAN function. Then, perform the "Initial Connection Settings 2 : Connection of the air purifier and a router".
Why the connection between the Sharp FP-J80TA and my smartphone cannot be established?
Make sure you have set up the wireless LAN connection on your smartphone. Ensure that the air purifier and your smartphone are connected to the same router. Note that the maximum number of smartphones that can be registered on one air purifier is 5, and the maximum number of products to be registered with one smartphone is 10.
What to do when changing the smartphone for Sharp Air Cleaner?
Delete the registration of the old smartphone from the designated application. Then, use the new smartphone to perform "Initial connection settings 1 : Installation of the application", and "Initial connection settings 3 : Connection between the air purifier and a smartphone".
What does it mean when the WLAN lamp is off on my Sharp FP-J80TA Air Cleaner?
Please confirm the Wireless LAN network status from "Wireless LAN network status". Also, check if the electric plug of the air purifier has come out of its power socket, or if the wireless LAN function has been stopped.
Why doesn’t the Main Unit’s Display match weather report or another hygrometer or thermometer in the room of my Sharp FP-J80TA?
Outdoor and indoor environments, as well as the home environment, may cause a reading on your Sharp Air Cleaner that differs from weather reports or other hygrometers or thermometers in the room. Also, there may be a difference in the level within the same room.
Why is the Front Display turned off on my Sharp FP-J80TA?
If the Front Display is turned off on your Sharp Air Cleaner, it may be because the light control is set to "Auto," which automatically turns off the light when the room is dark. If you do not want the light to be off, set the Light control to the "Darker" setting.
What to do if my Sharp FP-J80TA Air Cleaner does not operate when there is cigarette smoke?
If the Main Unit of your Sharp Air Cleaner does not operate when cigarette smoke is in the air, ensure that it is installed in a location where the sensors can detect cigarette smoke. Also, check if the dust(sensitive) sensor openings are blocked or clogged and, if they are, clean the sensor filter or the back panel.
What to do in case of being handed over Sharp FP-J80TA from a third party?
Perform "Initialization of wireless LAN function".
General| Brand | Sharp |
|---|---|
| Model | FP-J80TA |
| Category | Air Cleaner |
| Language | English |
Follow basic safety precautions, observe warnings for shock, fire, injury, and proper usage.
Details restrictions for persons with reduced capabilities and child supervision.
Covers cord damage, plug removal, and preventing shock/fire hazards.
Warns against wet locations, aerosols, oily residue, incense, and corrosive cleaners.
Do not block air intake/outlet, operate upright, avoid moving during operation, and keep away from water.
Avoid direct wind on sensors, ensure proper airflow, stable surface, and distance from walls.
Explains the functions of each button on the operation panel for controlling the unit.
Step-by-step guide for removing the back panel and installing the HEPA and Deodorizing filters.
Addresses persistent odors, smoke, and cleanliness monitor discrepancies.
