Sharp FP-S42

EN-6
How To Operate
Fan speed
♪
♪
♪
♪♪
♪
♪
AUTO
POLLEN
SLEEP
LOW
MED
MAX
AUTO:
The fan speed is automatically switched
depending on the amount of impurities in
the air.
POLLEN:
The Sensor sensitivity is increased
automatically to detect dirt in the air quickly,
and the product powerfully cleans the air.
SLEEP:
The product will operate quietly, and the
fan speed will automatically be switched
depending on the amount of impurities in
the air.
The Operation Panel and Cleanliness
Indicator will automatically turn off.
(However, some indicators required for
notifications will remain dim.)
Start/Stop
♪
♪～
Stop
Start
When the product starts up, it will operate in
the previous mode it was running in.
HAZE mode
♪
After the fan has operated for 60 minutes
on high speed, it will alternate between
operating at low speed and operating at
high speed for 20 minutes at each fan
speed.
FP-S42_40.indb 6FP-S42_40.indb 6 2024/03/15 10:13:222024/03/15 10:13:22