EN-15
Usage conditions
(As of April 2024)
Broadband internet connection
• Following connection methods cannot be
used.
- Dial up connection
- Connection that requires ID
authentication
• Following connection methods are not
guaranteed.
- Mobile router connection
- Tethering connection
Smart device (ex: smart phone)
• Minimum software requirements : Android
8 or later / iOS 12 or later
Wi-Fi access point (Router)
Wi-Fi specifications supported by
this product
• Frequency: 2.4GHz / 5GHz band
(IEEE802.11a/b/g/n)
• Channel:
<2.4GHz band> 1-13
<5GHz band> W52 (36, 40, 44, 48) / W53
(52, 56, 60, 64) / W56 (100, 104, 108, 112,
116, 120, 124, 128, 132, 136, 140, 141*
1
) /
W58 (149*
2
, 153*
2
, 157*
2
, 161*
2
, 165*
2
)
*1: Supports only India (FP-S42M).
*2: Supports only Malaysia (FP-S42L),
Vietnam (FP-S42V) and India
(FP-S42M).
• Security protocols: WPA Personal / WPA2
Personal / WPA3 Personal
• Recommended encryption: AES
• Bluetooth 5.0 (Bluetooth Low Energy only
support)
Intellectual property rights for this
product
• The software incorporated in this product
consists of the software developed or
created by our company and copyrighted
by our company, and the free software
copyrighted by third parties. For details of
the software incorporated in this product,
including license conditions, refer to the
following URL.
https://jp.sharp/support/cloud/adapter/
license_a04.pdf
Trademarks
• “Wi-Fi
®
” is a registered trademark of Wi-Fi
Alliance
®
.
• “WPA™” and “WPA2™” are trademarks of
Wi-Fi Alliance
®
.
• “Android” is a trademark of Google Inc.
• The other company names, corporate
names, product names mentioned in the
instructions manual are the trademarks
and the registered trademarks of each
company.
NOTE
Please disable the following
settings on the router.
• Stealth setting of SSID
• MAC address filtering setting
• Client isolation setting that prohibits
Wi-Fi communication between the
devices connected to the router.
FP-S42_40.indb 15FP-S42_40.indb 15 2024/03/15 10:14:152024/03/15 10:14:15