EN-20
Specifications
Model FP-S42
Power Supply AC Adapter *
1
Rated Input AC 100 - 240 V 50 - 60 Hz 0.9 A
Rated Outlet DC 24.0 V 1.5 A 36.0 W
Fan Speed Adjustment MAX MED LOW
Fan Speed (m
3
/ h) 240 132 48
Rated Power (W) 23 7.1 3.1
Noise Level (dB) *
2
46 34 21
Standby Power (W)
1.2 (When Wi-Fi adapter is ON.)
0.8 (When Wi-Fi adapter is OFF.)
Recommended Room Size (m
2
) *
3
Up to 30
High Density Plasmacluster Ion
Recommended Room Size (m
2
) *
4
Up to 23
Sensors
Sensitive Dust / Odor / Temperature /
Humidity
Filter Type Two in one HEPA *
5
and Deodorizing
Cord Length (m) Approx. 2.0
Dimensions (mm) 235 (W) × 235 (D) × 372 (H)
Weight (kg) Approx. 3.9
Recommended
Room Size *
6
CADR
Smoke Dust Pollen
AHAM
19 m
2
133 cfm
(226 m
3
/ h)
141 cfm
(240 m
3
/ h)
152 cfm
(258 m
3
/ h)
GB
26 m
2
260 m
3
/ h *
7
*1 This AC Adapter is a non-inherently short circuit proof transformer.
*2 The noise levels are measured based on the JEM1467 standard of the Japan Electrical
Manufacturers’ Association.
*3 The recommended room size is appropriate for operating the product of maximum fan
speed. The recommended room size is an area in which a given amount of dust particles
can be removed in 30 minutes (according to JEM1467).
*4 Room size in which approximately 7000 ions per cubic centimeter can be measured in
the center of the room at a height of approximately 1.2 meters from the floor when the
FP-S42_40.indb 20FP-S42_40.indb 20 2024/03/15 10:14:272024/03/15 10:14:27
To Next Page
Loading...
