Why my Sharp FU-40SE-K Air Cleaner does not operate even when smoking cigarettes?
If your Sharp Air Cleaner doesn't seem to react to cigarette smoke, it could be due to several reasons: the unit might be in a location where the sensors struggle to detect the smoke, or the odor and dust sensor openings may be blocked or clogged. Try cleaning these openings to resolve the issue.
How to fix a Sharp Air Cleaner remote control that is not working?
If the remote control for your Sharp Air Cleaner isn't working, consider the following: * Check if the batteries are depleted. * Ensure the batteries are inserted correctly. * Determine if fluorescent lighting in the room is flickering due to its service life.
Why is the Clean sign on my Sharp FU-40SE-K orange/red when the air is clean?
If the Clean sign on your Sharp Air Cleaner lights up orange or red even when the air seems clean, it's likely that the dust sensor is dirty or clogged, causing unstable sensor sensitivity. Clean the dust around the sensor opening using a vacuum cleaner.
What to do if the Clean sign on my Sharp FU-40SE-K Air Cleaner is green even when the air is dirty?
If the Clean sign on your Sharp Air Cleaner is green even when the air is dirty, check if the opening of the dust sensor is blocked or clogged. Also, consider whether the air was already dirty when you plugged the power plug into the wall outlet.
What to do if my Sharp FU-40SE-K Air Cleaner makes a clicking or ticking sound?
If you hear clicking or ticking sounds from your Sharp Air Cleaner, and the sound is irritating, try switching the unit to Clean mode or setting the Cluster ion mode to OFF, especially when sleeping.
General| Brand | Sharp |
|---|---|
| Model | FU-40SE-K |
| Category | Air Cleaner |
| Language | English |
The unit controls the ratio of minus cluster ions and plus cluster ions.
High-efficiency dust collection.
Powerful deodorization by large particles of columnar charcoal.
Discusses odors from adsorbed ingredients and filter replacement.
Covers precautions for power cord, usage, cleaning, and electrical hazards.
Warns about blocking ports, operating near heat, lampblack, and cleaning agents.
Ensures wall strength, proper spacing, and prevents unit from falling.
Recommends placement away from interference sources and ensuring air flow.
Suggests optimal placement, filter handling, and dust accumulation points.
Identifies lamps and sensors on the main unit's display panel.
Lists components like filters, remote, and stand in an exploded view.
Describes the color changes of the clean-sign lamp indicating air quality.
Explains blue, green, and off states for Clean, Refresh, and AUTO modes.
Lists remote control, batteries, stand, and mounting hardware.
Fixing the stand to the main unit for tabletop placement.
Determine mounting location and required clearances.
Caution against mounting on weak walls to prevent unit from falling.
Attach bracket 2, place cushions, then mount the unit securely.
Check bracket connection and power cord for safety.
Pull unit bottom towards you and lift; disconnect power cord.
Instructions for removing filters from bags and installing them.
Guide for opening the back cover and inserting batteries.
Install HEPA, stamina-power carbon, and pre-filters; affix date label.
Operate facing unit, check range, avoid signal blockage, and protect remote.
Details AUTO, Silent, Median, High, Max, Tobacco Smoke, and Pollen modes.
Explains ON/OFF, fan level, mode, filter reset, and timer buttons.
Details AUTO, Clean, Refresh, and OFF modes for cluster ions.
Wipe with a soft cloth, avoid volatile fluids and detergents.
Clean filters with vacuum cleaner nozzle, do not wash.
Remove dust from sensor openings to maintain sensitivity.
Provides guide for HEPA and stamina-power carbon filter replacement.
Steps for replacing filters and resetting the filter timer lamp.
Details model FZ-40SEF and filter disposal cautions.
Troubleshoots remote not working, ineffective odor/smoke removal.
Addresses clean sign errors, sounds, and unit operation problems.
Lists fan levels, dimensions, weight, and standby power.
To Next Page
