ENGLISH
FEATURES
Plasmacluster Ion Control
The unit controls the ratio of negative ions
and positive ions depending on the con-
dition of the room.
• Clean Mode
Approximately the same numbers of posi-
tive and negative ions are discharged.
This mode is effective for reducing some
airborne mold.
• Ion Control Mode
Plenty of negative ions exist in natural
surroundings such as waterfalls or forests.
In this mode, negative ions will be re-
leased in an increased rate, in order to
bring the room air close to this natural
environment.
• AUTO Plasmacluster Ion Mode
The unit will switch between Clean Mode
and Ion Control Mode automatically de-
pending on the amount of impurities in the
air detected by the dust and odour sen-
sors.
• SENTINEL Operation Mode
The “SENTINEL” function detects any air
enviornment that is favourable for
activation of mold, virus and allergen
using its 4 sensors for dust, odour,
temperature and humidity, and it releases
Plasmacluster Ions to create an
environment that controls the activity of
airborne microbes.
• Filters
1) Pre-Filter
It collects large particles.
2) Washable Active Carbon Filter
Its deodorizing performance can be
maintained by washing.
3) HEPA (High Efficiency
Particulate Air) Filter with
Microbial Control Filter
High-efficiency particle collection in-
cluding pollen and dust.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ....
E-2
•WARNING ....................................................E-2
• CAUTIONS CONCERNING OPERATION ...E-2
• REMOTE CONTROL LIMITATIONS ............E-2
• INSTALLATION GUIDELINES .....................E-3
• FILTER GUIDELINES ..................................E-3
• HOW SHARP AIR PURIFIER WORKS ........E-3
PART NAMES .......................................... E-4
• MAIN UNIT DISPLAY ...................................E-4
• INCLUDED ...................................................E-4
• BACK ...........................................................E-4
PREPARATION........................................ E-5
• INSERTING BATTERIES
IN THE REMOTE CONTROL ......................E-5
• REMOTE CONTROL USE ...........................E-5
• FILTER INSTALLATION ...............................E-6
OPERATION ............................................ E-8
• MAIN UNIT OPERATION .............................E-8
• REMOTE CONTROL OPERATION .......... E-10
CARE AND MAINTENANCE ................. E-11
• MAIN UNIT .................................................E-11
• ODOUR SENSOR / DUST SENSOR......... E-11
• FILTER CLEANING....................................E-11
•WASHABLE ACTIVE CARBON
FILTER CARE ........................................... E-12
• FILTER REPLACEMENT
GUIDELINES ............................................ E-13
TROUBLESHOOTING........................... E-14
SPECIFICATIONS ................................. E-15
E-1
ENGLISH
Thank you for purchasing the SHARP Air Purifier. Please read this manual carefully for the correct
usage information. Before using this product, be sure to read the section: “Important Safety In-
structions.”
After reading this manual, retain it in a convenient location for future reference.
To Next Page
Loading...
Need help?
General
